In the pharmaceutical industry, an even greater number of products are in the form of particulate solids. In the case of pharmaceutical substances the particle size is quite important since it can limit the bioavailability of poorly water soluble drugs. Since the mid-1980s, a new method of powder generation has appeared involving crystallization with supercritical fluids. In this study, RESS was used to micronize the creatine monohydrate particles. The RESS process consists in solvating the product in the fluid and rapidly depressurizing this solution through an adequate nozzle, causing an extremely rapid nucleation of the product into a highly dispersed material. In addition, the effect of six different RESS parameters including, extraction temperature (313–333 K), extraction pressure (140–220 bar), nozzle length (2–15 mm), effective nozzle diameter (450–1700 m), spraying distance (1–7 cm) and pre-expansion temperature (353–393 K) were investigated on the size and morphology of the precipitated particles of creatine monohydrate. The characterization (size andmorphology) of the precipitated particles of creatinemonohydrate was determined by scanning electron microscopy (SEM). The results show great reduction in the size of the precipitated particles of creatine monohydrate (0.36–9.06 m) compared with the original particles of creatine monohydrate. Moreover, a slight change into spherical form was observed for the precipitated particles of creatine monohydrate while the original particles were irregular in shape.
کلید واژگان :RESS Creatine monohydrate Micronization
ارزش ریالی : 600000 ریال
با پرداخت الکترونیک